Cleaning Your Mill

How to Clean Your Fletchers’ Mill Products

  • Unscrew the top nut
  • Remove the top
  • Empty any remaining salt or pepper
  • Turn the mill upside down and pop out the rod by tapping it firmly against a hard surface
  • Clean the mill with a dry brush or cloth
  • Push the rod back in from the bottom, making sure it goes through the grinder ring until it pops into place
  • Fill your mill with salt or pepper
  • Put the top back on, MAKE SURE THAT THE METAL KEY CLICKS IN ON THE ROD
  • Screw on top nut while pushing up on the rod so it is flush with the bottom of the grinding mechanism
  • The tighter the nut, the finer the grind
  • CAUTION: Water or moisture can damage the wood finish and affect the performance of the mill.

Filling Your Fletchers’ Mill Pepper or Salt Mill

 

Cleaning Silicone Tools

  • To Clean Silicone Head: Remove the silicone head. Silicone Heads are dishwasher safe.
  • To Clean Wood Handles: Clean the handles with a damp cloth and wipe dry. Do not put handle in dishwasher.

 

Cleaning Rolling Pins

  • To Clean: Wipe with damp cloth. Do not wash in dishwasher or submerge in water.
  • To Season Your Unfinished Rolling Pin: Clean and dry the rolling pin. Moisten a soft cloth with a quarter-size drop of mineral oil and use to lightly coat the rolling pin. There is no need to apply oil to the handles.